W. W. Patterson - Tensor Screw Type Belt Jack

The T-33 and T-200

The most reliable belt tensioning jack in the mines, this patented design features telescoping tubes, screw-type action, and chains with grab hooks on both ends. Simple and fast to operate - use ratchet wrench and power wrench and can be tightened to 8,000 lbs.

Model Numbers:	2 x 18 Type D 2020	2 x 24 Type D 2000
Performance Data:
Tensile Working Load Limit*/SWL	25,000	25,000
Take-up/Adjustment	14"	20"
Dimensions and Weights
Barrel Length:	18	24
Eye-to-eye Lengths:
Closed:	24"	30"
Open:	38"	50"

**Safe Working Load, in tension, provides a safe factor of approximately three to one.
All performance data and specifications set forth are guidelines.

T-33

T-200

*All performance data and specifications set forth in the above table are guidelines. The referenced data and specifications were produced under controlled testing conditions and should be used as estimates only. Due to variability in individual operators, in weather, in towing conditions, and in various other factors, actual results may vary. In addition, for the purpose of installation, please verify all dimensions as the dimensions, specifications, data and other information contained on this site are subject to change at any time without notice.

Winches: Electric • Enclosed Gear Electric • Low Profile Electric • Manual • Web Winch • Barge Connectors • Hydraulic • Barge Haul • Fleet Angle •
Ratchet Turnbuckles: Type D • Type J • Type DJ • Custom • Handles • Tensors: General Information • Dimensions •
Operating Manuals: Electric • Hydraulic • Manual • Barge Haul • Video • Company Links: Home• Site Map • About Us • Contact Us